Product name:Shearing machine,guillotine shear,cutting machine
hydraulic swing beam guilhotina shears
Model:QC12Y-4x4000 NC Hydraulic shearing machine

1.Steel-welded construction, vibration to eliminate stress with high strength and good rigidity
2.Advanced technology
2-1,adopted advanced hydraulic system reduced the pipe joints steadiness and reliability
2-2,oil cylinder fitted in series to avoid the cutting angle change while shearing the plate.
2-3,the setting surface of upper blade is screw this keep homogeneity of blade clearance while shearing the plate.
2-4,energy accumulator for stroke's returning back.
2-5,upper and lower balde is rectangle which material is 6CrW2Si ,with good hardness and long age.
2-6,the blade clearance can adjusted by hand wheel and the number marked on the plate. Adjust quickly and easily with good credibility.
2-7,blade stroke adjusted stepless, the pressure can adjusted according to the thickness automatically.
2-8,it has equipped with light to overlapping the draw line on the plate.Gauge size and cutting times adopt staff counter ,operate very easy.
2-9,protective grating controlled by electrical system.
2-10,support device with ball to reduce the damage of the board.
2-11,oil cylinder used No 45 steel substrate inside hole boring precise.
2-12, piston rod: used No 45 steel substrate plating Chromium outside.
3.CNC systems:

NO.	NAME		NUMBER	UNIT		REMARK
1	Shearing Thickness		4	mm
2	Shearing Width		4000	mm
3	Sheared Bard Srength≤		450	N/mm2
4	Shearing Angler		1°30'
5	Back gauge Range		20-600	mm
6	Number of Stroke		5.5	Min-1
7	Motor	Specification	Y132S-5.5   B5
		Power	0.55		kw
		Speed	1440		rpm
8	Pump	Specification	10MCY14-1B
		Pressure	18		Mpa
		Nominal displacem              Rate of Flow	32		L/min
9	Overall Dimensions	Length	4600		mm
		Width	1850		mm
		Height	1760		mm
10	Weight		5160		KGS